A Quick Update on the 2011 Duramax
GM issued a press release not too long ago regarding the new emission control technology for their 2011 Duramax Diesel. We had a post about the new Duramax last month, so this information should clear up some of the questions we all had about the size of tank and heating system on the Urea injection.
GM’s 6.6L Duramax diesel features the latest in emission control technology, making it the cleanest Duramax engine ever produced, with NOx emissions reduced by at least 63 percent, compared to the 2010 model. NOx emissions are controlled via a Selective Catalyst Reduction aftertreatment system that uses urea-based Diesel (Emission) Exhaust Fluid (DEF). The DEF is housed in a 5.3-gallon (20 L) tank and needs to be replenished about every 5,000 miles (8,000 km). Electrically heated lines feed the DEF to the emission system to ensure adequate delivery in cold weather.
The 2011 Duramax 6.6L will also include GM’s second-generation diesel particulate filter system. Unlike most of the competition, the Duramax regenerates its diesel particulate filter using a downstream injection of diesel fuel directly into the exhaust stream and can travel up to 700 miles (1,125 km) between regenerations – a 300-mile (482 km) increase over the previous Duramax engine. The use of downstream injection also helps to improve engine life by eliminating concerns surrounding the possibility of diesel fuel contaminating engine oil, which can happen when fuel used for regeneration is introduced directly into the cylinder.
We should be receiving the new Duramax trucks in the 3rd quarter of this year – check back for any new information.